High grade rosin resin elastic adhesive spandex hot melt glue for disposable baby adult diaper production
Elastic Adhesive
DESCRIPTION Hot Melt Adhesive
FEATURES: Elastic attachment adhesive for disposable hygiene products. Excellent creep performance on all types of elastic, especially synthetic rubber. Has excellent adhesion to PE, PP and NW. Also can be applied as a construction adhesive.
·May be applied by spray or multibead, or slot
·Transparent when coated
·Low odor
·Light color
·Wide application latitude
TECHNICAL PROPERTIES
Brookfield Viscosity (ASTM D3236) R&B Softening Point (ASTM E28)
About 1850 mPa.s @ 170℃ About 90℃
Gardener Color (ASTM D36) Suggested Runing Temp
About 2.0 155 – 170℃
STORAGE | Can be stored 12 months in a clean dry place, in its original package at an average temperature of 25℃ or below. Storage temperature should not exceed 35℃. |
CLEAN-UP | Mineral oil or paraffin wax, not to exceed flash point as stated on the MSDS, followed by a thorough purge with the adhesive itself. |
PACKAGING | Available in film wrapped block (about 2kg). |
SAFETY |
MSDS should be consulted for proper handling before use. Wear safety gloves and goggles when handling molten adhesive. TEP 920 compositionally complies with FDA 175.105. |